How To Repair Cctv Camera Foggy Front

My photographic camera is blurry or foggy due to moisture on or in the camera. What do I exercise?

When condensation forms on a security camera, it can blur lenses and compromise image quality. Condensation is because of two factors, humidity, and the temperature difference between the air and the photographic camera. Condensation occurs on the warm side of the glass. For example in summer there may be condensation in the morning on the outside of the camera lens.

Another example would be after a cool night, the air starts to get warmer and the camera lens volition announced foggy. This consequence can be more evident in the wintertime.

moisture in the dome or near the lens causes infrared bounceback and the view to look blurry or foggy

Do Not Remove the Silica Packet

All SCW cameras accept a silica packet installed inside the device which attempts to blot moisture created by the condensation. Practise non remove this silica package.

Why the Silica Packet is Needed

A camera that has power will generate a pocket-sized corporeality of heat. The common cold air outside vs. the slightly higher temperature of the camera will create condensation on the inside of the lens. The colder and more boiling the climate, the longer this effect volition last. Nearly of the time the silica packet will blot moisture in a few hours. In that location have been cases of below-freezing temperatures taking a few days, up to a week, or more.

silica packet absorbs moisture in security camera enclosure

Steps to Take to Remove Wet:

If your newly installed camera has condensation nosotros generally recommend keeping them outside for approximately seventy-ii hours to run across if the condensation tin naturally dissipate. If information technology's non improving within seventy-two hours, y'all may have to re-acclimate the camera.

To Acclimate the Camera to your Environment:

one. Bring the camera back inside (remove from original installation point)

two. Place the photographic camera and some silica bead packets within the original handbag packaging. If you lost the silica dewdrop packets, ane can be purchased from home improvement stores for a few dollars.

three. Look until condensation is prodigal.

iv. With the camera notwithstanding in the bag, place the camera outside for a few hours to acclimate to the exterior temperature.

five. Once acclimated you tin go on the install equally normal.

Get a Quote

Our solutions range in pricing to fit all budgets. No matter your needs, we've got the solution.

Request a Floorplan

We're happy to create a custom floor plan simply for y'all.

Get Back up

Our support hours are from 9 AM - vii PM, Monday - Friday (EST).